Jump to content

Late Break


Stinky Stanky

Recommended Posts

I have a serious question here.  What causes the late break on a pitch that analysts are always talking about?  A pitch leaves the pitcher's hand with a certain spin rate and velocity which determine the size and direction of the break.  If a pitch is to start breaking more during its flight, it can't be because the spin rate increases; if anything, the spin rate will decrease slightly during its flight.  That would actually cause it to break less. Contrariwise, the velocity of a thrown ball will decrease slightly during its flight because of air resistance.  That slower speed would cause it to break slightly more because of less inertia.  So the two effects would seem to even out.

What then, is the cause of the late break, or is the late break effect an illusion of some sort?

Link to comment
Share on other sites

Basically if you have ever thrown a curve you know how it works. A good curve ball is thrown with an amount of finger pressure and snapping the wrist. This will impart some amount of side spin and backspin .Basically the mound is just the right distance from the plate for the spin to take effect. While it spins the minute it leaves your hand it takes a split second for it to react against the air surrounding it. The same thing applies on a batted ball going to the opposite field or a golf ball when it slices.

Now it obviously takes time to perfect the pitch and pitchers do experiment with different ways to throw it to find whats best for them as far as release point and the amount of break and when it breaks, that feels best for them and can be delivered with the most consistency. Some pitchers can throw a curve a number of ways with varying amounts of speed and spin. I'm sure you have heard the term " a get me over curve or fastball", Or a big breaking curve as opposed to a sharp or late breaking curve. Usually the difference with those are the speed the pitch is thrown. Slower curves will break earlier and has a bigger arc because they take a smidge more time to reach the plate so the spin takes effect earlier.

I don't know if I truly answered your question. A pitcher who throws them well and with consistency has put in a lot of hours playing around with the pitch in every way possible. Lower seams and slicker balls make it even harder which is one reason so many pitchers started using spider tack besides the obvious reason of getting more spin.

Link to comment
Share on other sites

Simulated curve-ball trajectory. (The solid line represents the normal... |  Download Scientific Diagram

 

This is from a 1998 paper. There are lots of versions of it in various formats. The upper chart is "as if you were looking down on the pitch", the lower chart is "watching the pitch from the side". 16 meters is just over 48 feet, so the pitch would be thrown about 12 feet off to the right of this chart. 

To get the late break on a curveball you need 2 things. You need the ball to have a spin on it that interacts with the wind - that is what deflects the pitch gradually to the side. You also need the pitch to hit the "peak" of its trajectory at the right point - if the peak comes too late, the pitch won't break enough and it will become a hanger. If you have the peak at the right spot, then the pitch will be accelerating downwards as it approaches the batter and that will give you the impression of a late break downwards, because it has been moving down but because the speed increases enough for your eyes to see it just as it passes the plate.

https://www.researchgate.net/figure/1-Simulated-curve-ball-trajectory-The-solid-line-represents-the-normal-gravitational_fig25_241376252

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...