Heads22 Posted October 28, 2004 Share Posted October 28, 2004 I'm a bit nervous about this.....for physics we launch our cardboard boats tomorrow.... Our dimensions are as such..... 73 inches long x 52 inches wide x 18 inches tall for the body and a nose that is 23 inches long on top and the bottom is 26 sloped up to create an 8 inch gap that is filled in on either side back to the boat. Anybody have past experience with cardboard boats? I know the key is to displace a ton of waterbut my main concerns are us sitting too low in the water (I weigh roughly 125 but my partner weighs roughly 235), the cardboard soakinng up water like a sponge and the rigidity and stableness of the bottom and sides. We need to make it across (the long way) a regulation pool and back for full credit.... Quote Link to comment Share on other sites More sharing options...
Heads22 Posted October 28, 2004 Author Share Posted October 28, 2004 Here's a rough description of what it looks like... Quote Link to comment Share on other sites More sharing options...
Goober Posted October 28, 2004 Share Posted October 28, 2004 needs a better name. like Titanic II Quote Link to comment Share on other sites More sharing options...
Soxy Posted October 28, 2004 Share Posted October 28, 2004 needs a better name. like Titanic II Rosemary, that's for remembrance. Anyway, good luck with that--I've done a few cardboard boat races--and was usually most successful when the littlest person did the navigation and stuff. Good luck! Quote Link to comment Share on other sites More sharing options...
Heads22 Posted October 28, 2004 Author Share Posted October 28, 2004 ChiSoxy....does our design look like it will work? Quote Link to comment Share on other sites More sharing options...
Soxy Posted October 28, 2004 Share Posted October 28, 2004 ChiSoxy....does our design look like it will work? To be honest, I was never great at designing them. But I think that the nose you've put on it is good--and it seems like a pretty good design. Too bad you have such a mismatch of weight though--that might cause some problems. But it looks as good as anything my teams have put in water. So, good luck with it! Quote Link to comment Share on other sites More sharing options...
Heads22 Posted October 28, 2004 Author Share Posted October 28, 2004 Thanks. Our plan's to paddle like hell.... Quote Link to comment Share on other sites More sharing options...
Texsox Posted October 28, 2004 Share Posted October 28, 2004 Think smooth with the paddling. The teams that put as little stress on their boats as possible seem to do better. Quote Link to comment Share on other sites More sharing options...
mreye Posted October 28, 2004 Share Posted October 28, 2004 They have a race every year for the Summerfest around July 4, but I've never gone to it. It sounds like good fun, though. Good luck heads! Quote Link to comment Share on other sites More sharing options...
DBAHO Posted October 28, 2004 Share Posted October 28, 2004 Once for a Science Experiment we made a can crusher, with a moving lil billycart down a ramp that would drop a large paint can on a can. Pretty interesting stuff. Quote Link to comment Share on other sites More sharing options...
Heads22 Posted October 28, 2004 Author Share Posted October 28, 2004 We got second place in the class of 5. We made it 3.5 lengths of the pool while the winners went 4. The next two both went 1 and last place never made it get going. Our biig problem was our boat creased across the middle, so the front was way up in the air. Water didn't start leaking in til the start of the 3rd length. My plastic paddle also snapped. Quote Link to comment Share on other sites More sharing options...
kapkomet Posted October 28, 2004 Share Posted October 28, 2004 We got second place in the class of 5. We made it 3.5 lengths of the pool while the winners went 4. The next two both went 1 and last place never made it get going. Our biig problem was our boat creased across the middle, so the front was way up in the air. Water didn't start leaking in til the start of the 3rd length. My plastic paddle also snapped. so what in your design would have been better to correct for this? Quote Link to comment Share on other sites More sharing options...
Heads22 Posted October 28, 2004 Author Share Posted October 28, 2004 It was too damn long I think. That and extra stabilization but we ran out of duct tape. Our nose saved us, really. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.